### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4

# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l

# Your preferred terminal emulator
set $term alacritty
set $browser librewolf
set $files nemo

# wallpapers
set $mainwall /home/johannes/Files/Pictures/walls/csgo/Gamma-Doppler.png
set $leftwall /home/johannes/Files/Pictures/walls/csgo/M4A1-S-Nightmare.png
set $rightwall /home/johannes/Files/Pictures/walls/csgo/PARACORD-CRIMSON.png
set $topwall /home/johannes/Files/Pictures/walls/csgo/deagle-code-red.png

# Your preferred application launcher
# Note: pass the final command to swaymsg so that the resulting window can be opened
# on the original workspace that the command was run on.
# set $menu dmenu_path | dmenu | xargs swaymsg exec --
set $menu eval "dmenu_run $DMENU_COLORS -p 'dmenu'"

### Output configuration
#
# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
# Main
output DP-1 bg $mainwall fill
# Left
output DP-3 bg $leftwall fill
# Right
output DP-2 bg $rightwall fill
# Top
output HDMI-A-1 bg $topwall fill

output * bg /home/johannes/Files/Pictures/walls/etc/insight.jpg fill

#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs
output DP-3 pos 0 768
output DP-1 pos 1920 768 mode 1920x1080@143.981Hz
output DP-2 pos 3840 768
output HDMI-A-1 pos 4500 0
# 4500 is approximate location of monitor

# Assign Workspaces to outputs
workspace 1 output DP-1
workspace 2 output DP-3
workspace 3 output DP-2
workspace 4 output HDMI-A-1

### Idle configuration
#
# Example configuration:
#
# exec swayidle -w \
#          timeout 300 'swaylock -f -c 000000' \
#          timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
#          before-sleep 'swaylock -f -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration
#
# Example configuration:
#
#   input "2:14:SynPS/2_Synaptics_TouchPad" {
#       dwt enabled
#       tap enabled
#       natural_scroll enabled
#       middle_emulation enabled
#   }
#
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.

### Key bindings
#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term

    # Start Web browser
    bindsym $mod+w exec $browser
    bindsym $mod+f exec $files
    bindsym $mod+s exec /usr/bin/spotify-launcher
    bindsym $mod+b exec /usr/bin/firefox
    bindsym $mod+m exec /usr/bin/monero-wallet-gui
    bindsym $mod+n exec /home/johannes/.local/bin/copymenu

    # Kill focused window
    bindsym $mod+q kill

    # Start your launcher
    bindsym $mod+d exec $menu

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+r reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+e exec ~/.local/bin/dpowermenu

    # Lock screen with blur
    bindsym $mod+Semicolon exec ~/.config/sway/lock.sh

    # Media Control
    bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ -5%
    bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ +5%
    bindsym XF86AudioPlay exec playerctl play-pause
    bindsym XF86AudioNext exec playerctl next
    bindsym XF86AudioPrev exec playerctl previous
    bindsym XF86AudioStop exec playerctl stop
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right

    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right

    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace number 1
    bindsym $mod+2 workspace number 2
    bindsym $mod+3 workspace number 3
    bindsym $mod+4 workspace number 4
    bindsym $mod+5 workspace number 5
    bindsym $mod+6 workspace number 6
    bindsym $mod+7 workspace number 7
    bindsym $mod+8 workspace number 8
    bindsym $mod+9 workspace number 9
    bindsym $mod+0 workspace number 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace number 1
    bindsym $mod+Shift+2 move container to workspace number 2
    bindsym $mod+Shift+3 move container to workspace number 3
    bindsym $mod+Shift+4 move container to workspace number 4
    bindsym $mod+Shift+5 move container to workspace number 5
    bindsym $mod+Shift+6 move container to workspace number 6
    bindsym $mod+Shift+7 move container to workspace number 7
    bindsym $mod+Shift+8 move container to workspace number 8
    bindsym $mod+Shift+9 move container to workspace number 9
    bindsym $mod+Shift+0 move container to workspace number 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # Switch the current container between different layout styles
    bindsym $mod+Shift+y layout tiling
    bindsym $mod+Shift+t workspace_layout default

    # Make the current focus fullscreen
    bindsym $mod+t fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"
# bindsym $mod+m move workspace to output right

# Personal settings
focus_follows_mouse no
gaps inner 5
default_border pixel 1

exec_always /usr/bin/indicator-sound-switcher
exec /usr/bin/dunst

bar {
    swaybar_command waybar
}

# Color Settings
# set $base00 #282828
# set $base01 #504945
# set $base03 #928374
# set $base05 #8ec07c
# set $base07 #fbf1c7
# set $base08 #cc241d
# set $base0D #98971a
#
# # class                 border  bground text    indicator child_border
# client.focused          $base05 $base0D $base00 $base0D $base0D
# client.focused_inactive $base01 $base01 $base05 $base03 $base01
# client.unfocused        $base01 $base00 $base05 $base01 $base01
# client.urgent           $base08 $base08 $base00 $base08 $base08
# client.placeholder      $base00 $base00 $base05 $base00 $base00
# client.background       $base07

include /etc/sway/config.d/*
